We have Answers

  • +91 22 2380 2218
  • sales@dmitubes.com

DIN 2609 steel butt welding pipe fittings manufacturer in India


The technical delivery conditions for alloyed and non-alloyed butt weld steel fittings are enveloped by standard DIN 2609. Typically, one type of alloy steel used in the manufacture of DIN 2609 Buttwelding fittings is carbon steel. Most carbon steel grades are valued for their elevated hardness properties and for their lower than most alloys cost. Since carbon steels are basically un-alloyed, most manufacturers gain a lot by using DIN 2609 Carbon Steel Pipe Fittings.

DIN 2609 Elbow

 

Carbon steel fittings drastically bring down the cost of the entire application by a huge margin. As the material, has no corrosion resistance whatsoever, the fittings could be galvanized using a thick layer of zinc for maximum corrosion resistance or they could be treated for mild resistance to corrosion. In comparison to the seamless variety, the cost of manufacturing DIN 2609 steel butt welding pipe fittings is still another technique to further bring the cost down. Though producing a seamless fitting would ensure the performance of almost 20% higher in high pressure environments as opposed to welded kind. Like most fittings, the DIN 2609 Elbow is used to influence change in the flow of direction of media either by 45 degrees or by 90 degrees, or to any angle, based on the requirement of the application.

DIN 2609 Elbow according to EN 10253



DIN 2609 Elbow specification schedule

Standard : DIN 2609

material : St37.0, St35.8I, St35.8III, 15Mo3, 13CrMo44, 10CrMo910, 1.4541,1.4571

DIN 2609 (A, B, C, D, E, H) : Elbows. 1- reduced correlation uf utilaization. 2 - Full correlation of utilaization.

DIN 2609 (R, S, T) : Buttwelding fittings


Different Carbon Steel Seamless Pipe Types

Seamless and Welded carbon steel elbows to DIN 2609


carbon steel seamless din 2609 elbow
carbon steel seamless din 2609 elbow
90 degree DIN 2609 stainless steel pipe fitting elbow
90 degree DIN 2609 stainless steel pipe fitting elbow
DIN 2609 90 degree flange elbow
DIN 2609 90 degree flange elbow
DIN 2609 6 Inch stainless steel polished elbow 90 degree
DIN 2609 6 Inch stainless steel polished elbow 90 degree
DIN sanitary din 2609 series 2inch welded elbow
DIN sanitary din 2609 series 2" welded elbow
DIN 2609 ansi 3 inch 45 degree stainless steel elbow
DIN 2609 ansi 3 inch 45 degree stainless steel elbow
DIN 2609 24 inch 90 degree carbon steel elbow
DIN 2609 24 inch 90 degree carbon steel elbow
DIN 2609 Standard PN10 90 Degree Elbow
DIN 2609 Standard PN10 90 Degree Elbow
DIN 2609 DN 300 12inch TYPE 3 90 degree elbow
DIN 2609 DN 300 12" TYPE 3 90 degree elbow

Mechanical Properties of Seamless SCH 40 carbon steel pipe

DIN 2609 St 37.0 type A Carbon Steel Elbow & Return in Std Wt, Sch 120, Sch XS, Sch 160 & Sch XXS

DIN 2609 Elbow Dimension
1 WDR
2 3 4 5
3 DN1 d1 s s s BA r b
4 2 17.5 28
5 15 21.3 2.0 3.2 4.0 3 28.0 38
6 5 42.5 53
7 2 25.0 39
8 20 26.9 2.3 3.2 4.0 3 29.0 43
9 5 57.5 71
10 2 25.0 42
11 25 33.7 2.6 3.2 4.0 3 38.0 56
12 5 72.5 90
13 2 32.0 53
14 32 42.4 2.6 3.6 4.0 3 48.0 69
15 5 92.5 114
16 2 38.0 62
17 40 48.3 2.6 4.0 5.0 3 57.0 82
18 5 107.5 132
19 2 51 81
20 50 60.3 2.9 4.5 5.6 3 76 106
21 5 135 165
22 2 63 102
23 65 76.1 2.9 5.0 7.1 3 95 133
24 5 175 213
25 2 76 121
26 80 88.9 3.2 5.6 8.0 3 114 159
27 5 205 250
28 2 102 159
29 100 114.3 3.6 6.3 8.8 3 152 210
30 5 270 327
31 2 127 197
32 125 139.7 4.0 6.3 10.0 3 190 260
33 5 330 400
34 2 152 237
35 150 168.3 4.5 7.1 11.0 3 229 313
36 5 390 474
37 2 203 313
38 200 219.1 6.3 8.0 12.5 3 305 414
39 5 510 620
40 2 254 391
41 250 273.0 6.3 8.8 - 3 381 518
42 5 650 787
43 2 305 467
44 300 323.9 7.1 10.0 - 3 457 619
45 5 775 937

DIN and other Test certifications

  • DIN 2605-1/-2
  • DIN 2609
  • EN 10253-4
  • EN 10253-3
  • AD 2000-W2
  • AD 2000-W10
  • VdTÜV 1252
  • VdTÜV 418
  • VdTÜV 421
  • ASME B 16.9
  • ASTM / ASME A / SA 815 / 403