API 5L X80 Steel Line Pipe supplier
There are several reasons that make grade X80 one of the more stronger carbon steel pipes under the API 5L specification. Firstly, the checks performed on API 5L Grade X80 PSL 2 pipes are more through and every pipe produced is checked. Secondly, the chemistry is followed through with very narrow tolerance values. However, the content of carbon could be modified with if the pipe to be made via a welded construction.
Api 5l X80 Pipes made via welding can be processed to such a degree that the longitudinal weld seam made on the body is reduced. This procedure is practised by several manufacturers to avail good quality welded pipes at an affordable cost. Though it is important for businesses to vet their manufacturer or supplier prior to purchasing an Api 5l X80 Line Pipe, as an improperly welded product is not only susceptible to getting attacked by intergranular corrosion on the weld seam, but also getting cracked. These issues are not seen in a product like the Api 5l X80 Seamless Pipe. Though the cost of choosing a seamless product over a welded one is a more expensive one. But cost aside, the performance of a seamless variety Api 5l X80 Psl2 pipe is much better than a PSL 1 pipe as the tolerance is much lower, thus ensuring only good quality pipes are supplied to the buyer.
Large diameter ISO 3183 L555 X80 Pipeline Steel exporter in India
API 5L X80 Pipes Specification Format
Check Yield strength & Impact Test of EN10208-2 API 5L X80 Seamless Pipes
| Specification | API 5L X80, ASTM A1024 / A1024M, ISO 3183 |
| Scope | Covers Seamless, Welded, ERW pipes are suitable to convey water, gas and oil in both the oil and natural gas industries. |
| Hot-Dipped Galvanizing | May be ordered galvanized. |
| Manufacturing techniques | X80 Welded
X80 Seamless |
X80 Pipe Specification
| Sizes | Nominal Pipe Size 1/2" to 48 " O.D. Wall Thickness - Schedule 10 through 160, STD, XS, XXS. |
|---|---|
| Product Specification Level (PSL) | API 5L X80 PSL 2 API 5L X80 PSL 1 |
| Thickness | SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules |
| Applications | Oil Refineries, Petrochemicals, Power Generation (Nuclear/Thermal), Steel, Sugar, Boiler Equipments, Pressure Vessels and General Engineering Purposes |
| Pipe End | Plain, Bevel, Screwed, Threaded |
| API 5L X80 Pipes Type | Seamless / ERW / Welded / Fabricated / CDW |
| API 5L X80 Line Pipe Length | Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths |
| Testing and Inspection Reports | EN 10204 3.1, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, Destructive Test Report, Non Destructive Test Reports, Mill TC EN 10204 3.1, NABL Approved Lab, Chemical and Mechanical Reports, India Boiler Regulations (IBR) Test Certificate |
| Packing | API 5L X80 GR. B Pipe Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Finishes | Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.End Finishes:Beveled, Square Cut, Threaded & Coupled. |
| Application & uses | Suitable for Conveying gas, water, oil, and other liquefied media. |
| Other manufacturers of API 5L X80 Seamless steel pipe | MSL, JSL, ISMT, USL, BAO, Lontrin, SMTM, TNRS, V&M and Wuxi |
| BS EN 10208-2:2009 | API 5L X80 pipelines for combustible fluids. Suitable to use in maximum operating pressure over 16 bar. |
| Value added service |
|
Frequently Used API 5L Grade X80 Pipe Types
API 5L X80 PSL1 Seamless Line Pipe
API 5L X80 Line Pipe
Welding X80 Pipe
X80 Pipeline Steel
X80 Line Pipe
X80 Seamless Pipe
API 5L X80 Steel Pipe
ISO 3183 L555
API 5L Grade X80 Pipe
Tubos API 5L X80 Pipe Equivalent
PED approved API 5L X80 Pipe supplier in Mumbai, view updated price list of API 5L X80 Material
| ASTM API 5L | Specification for line pipe | |
|---|---|---|
| Material Grade | PSL1 | - |
| Material Grade | PSL2 | L555Q or X80Q L555M or X80M |
API 5L X80 Line Pipe Chemical Properties
| Grades | Material number | C max | Si max | Mn. max | P max | S max | AL min | Mo max | Ni max | Nb max |
|---|---|---|---|---|---|---|---|---|---|---|
| X80 | 1.8978 | 0.08 | 0.26 | 1.75 | 0.011 | 0.0005 | 0.03 | 0.27 | 0.22 | 0.070 |
X80 Pipeline Steel Mechanical Behaviour
| Grade | Permissible yield point ratio | Yield Strength MPa(min) | Tensile Strength MPa | Elongation % (min) |
|---|---|---|---|---|
| X80 | = 0.90 | 555 | 625 – 700 | 20 |
Schedule Chart of ISO 3183 L555 pipe
| NPS (in) |
Outside Diameter (in) |
API 5L X80 Pipe Schedule | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SCH 10 | SCH 20 | SCH 30 | SCH STD | SCH 40 | SCH 60 | SCH XS | SCH 80 | SCH 100 | SCH 120 | SCH 140 | SCH 160 | SCH XXS | ||
| Wall Thickness (in) | ||||||||||||||
| 1/8 | 0.405 | 0.068 | 0.068 | 0.095 | 0.095 | |||||||||
| 1/4 | 0.540 | 0.088 | 0.088 | 0.119 | 0.119 | |||||||||
| 3/8 | 0.675 | 0.091 | 0.091 | 0.126 | 0.126 | |||||||||
| 1/2 | 0.840 | 0.109 | 0.109 | 0.147 | 0.147 | 0.187 | 0.294 | |||||||
| 3/4 | 1.050 | 0.113 | 0.113 | 0.154 | 0.154 | 0.219 | 0.308 | |||||||
| 1 | 1.315 | 0.133 | 0.133 | 0.179 | 0.179 | 0.250 | 0.358 | |||||||
| 1 1/4 | 1.660 | 0.140 | 0.140 | 0.191 | 0.191 | 0.250 | 0.382 | |||||||
| 1 1/2 | 1.900 | 0.145 | 0.145 | 0.200 | 0.200 | 0.281 | 0.400 | |||||||
| 2 | 2.375 | 0.154 | 0.154 | 0.218 | 0.218 | 0.344 | 0.436 | |||||||
| 2 1/2 | 2.875 | 0.203 | 0.203 | 0.276 | 0.276 | 0.375 | 0.552 | |||||||
| 3 | 3.500 | 0.216 | 0.216 | 0.300 | 0.300 | 0.438 | 0.600 | |||||||
| 3 1/2 | 4.000 | 0.226 | 0.226 | 0.318 | 0.318 | |||||||||
| 4 | 4.500 | 0.237 | 0.237 | 0.337 | 0.337 | 0.438 | 0.531 | 0.674 | ||||||
| 5 | 5.563 | 0.258 | 0.258 | 0.375 | 0.375 | 0.500 | 0.625 | 0.750 | ||||||
| 6 | 6.625 | 0.280 | 0.280 | 0.432 | 0.432 | 0.562 | 0.719 | 0.864 | ||||||
| 8 | 8.625 | 0.250 | 0.277 | 0.322 | 0.322 | 0.406 | 0.500 | 0.500 | 0.594 | 0.719 | 0.812 | 0.906 | 0.875 | |
| 10 | 10.750 | 0.250 | 0.307 | 0.365 | 0.365 | 0.500 | 0.500 | 0.594 | 0.719 | 0.844 | 1.000 | 1.125 | 1.000 | |
| 12 | 12.750 | 0.250 | 0.330 | 0.375 | 0.406 | 0.562 | 0.500 | 0.688 | 0.844 | 1.000 | 1.125 | 1.312 | 1.000 | |
| 14 | 14.000 | 0.250 | 0.312 | 0.375 | 0.375 | 0.438 | 0.594 | 0.500 | 0.750 | 0.938 | 1.094 | 1.250 | 1.406 | |
| 16 | 16.000 | 0.250 | 0.312 | 0.375 | 0.375 | 0.500 | 0.656 | 0.500 | 0.844 | 1.031 | 1.219 | 1.438 | 1.594 | |
| 18 | 18.000 | 0.250 | 0.312 | 0.438 | 0.375 | 0.562 | 0.750 | 0.500 | 0.938 | 1.156 | 1.375 | 1.562 | 1.781 | |
| 20 | 20.000 | 0.250 | 0.375 | 0.500 | 0.375 | 0.594 | 0.812 | 0.500 | 1.031 | 1.281 | 1.500 | 1.750 | 1.969 | |
| 22 | 22.000 | 0.250 | 0.375 | 0.500 | 0.375 | 0.875 | 0.500 | 1.125 | 1.375 | 1.625 | 1.875 | 2.125 | ||
| 24 | 24.000 | 0.250 | 0.375 | 0.562 | 0.375 | 0.688 | 0.969 | 0.500 | 1.219 | 1.531 | 1.812 | 2.062 | 2.344 | |
| 30 | 30.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.500 | ||||||||
| 32 | 32.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.688 | ||||||||
| 34 | 34.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.688 | ||||||||
| 36 | 36.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.750 | ||||||||
| 42 | 42.000 | 0.500 | 0.625 | 0.375 | 0.750 | |||||||||